SkyWedge

Opens & closes in 15 seconds.

OPEN:

1. Unlatch the four latches.
2. Push the tent up. - Done!

CLOSE:

1. Grab the black strap & pull down
2. Tuck the tent fabric in
3. Lock the 4 latches - Done!

The SkyWedge replaces your factory roof with a fully integrated rooftop tent system.

During installation, we remove your existing hard or soft top and replace it with the SkyWedge, creating a seamless setup designed specifically for your vehicle.

Access the tent from the rear seats by simply pushing up the two interior access panels.

The camper requires minimal routine maintenance:

• Check mounting bolts: Every 3,000 km or after heavy off-roading.
  
• Lubricate locks: Every 2–3 months.
  
• Air out the tent: After wet trips and before closing.

See the Owner’s Manual in the footer for full maintenance details.

Estimated 16-20 weeks.

Lead times are estimates and subject to change. If you have questions about a lead time, please reach out to support@roamifycampers.com

Protective Rainfly: Adds an extra layer of protection against rain and the elements.

Water Resistant Tent Material: 280g silk cotton fabric with waterproofing treatment.

Water Resistance: 10,000mm dynamic waterproof rating and 3,000mm pressure resistance.

High Wind Resistance: Designed to withstand wind speeds up to 178 km/h.

Important Notes

• Hard top required
• Soft top vehicles must purchase rear window with hinges & wiring: +$1,500 CAD
  (Must be confirmed at time of order)

Key Features: 

• Full pop up camper with low factory height & interior passthrough 
• Composite Construction Strong, light & ready for any weather 
• Bug Mesh on all windows 
• 270 Panoramic Views & Sunroof to watch the starts 
• Diesel heater ports
• Full Roamify warranty, local stock for parts & worldwide shipping 

Specifications

• Tent Type: Semi-automatic triangle (gas strut)
• Shell Material: Composite fibre & molded plastic
• Fabric: 280g Silk Cotton with waterproofing spray 
• Waterproof Rating:
• Dynamic: 10,000mm
• Pressure-resistant: 3,000mm
• Wind Resistance: Up to 178 km/h
• Height Increase: 7 cm
• Weight Increase: 100 lbs
• Tent Load Capacity: 575 lbs
• Roof Rail Load Capacity: 140 lbs

Dimensions:

• Bed: 215 × 128 × 3 cm (84.5" × 50.25" × 1.125")
• Closed: 240 × 135 × 8 cm (94.5" × 53.25" × 3.25")
• Open: 240 × 135 × 160 cm (94.5" × 53.25" × 63")

Weight:

• Product Net Weight: 225 lbs
• Center of gravity remains consistent with factory

Shipping

• Available worldwide (crated, ready for install) *shipping rates vary*
• Packing Dimensions: 280 × 180 × 100 cm (110.4" × 70.4" × 40")
• Transport Weight: 555 lbs

From the moment you place your deposit to the day you pick up your camper, our team keeps you updated every step of the way.

1. Place Your Deposit
Your deposit secures your camper and allows us to begin preparing everything needed for production.

2. Production Begins
We gather the materials and components for your camper and begin production. We’ll keep you updated as your camper progresses.

3. On Its Way to Us
Once production is complete, your camper is transported to our Abbotsford facility for its final preparation and quality checks.

4. Final Prep & Quality Control
Once your camper arrives, our team completes the finishing work, including sealing, water testing, accessory installation, and a thorough final inspection.

5. Final Balance & Installation
When your camper is ready, we’ll contact you for the remaining balance and schedule your installation appointment.

6. Installation Day
Our team installs your camper at our Abbotsford facility and makes sure everything is ready for you before you head out. Install takes about 1 hour but may vary if electrical or solar is being added.

Throughout the Process
You’ll receive updates from our team throughout the process, so you always know what stage your camper is at and what comes next.