Dual Wedge

Opens & closes in 30 seconds.

OPEN:

1. Unlatch the two latches on the hatch
2. Push up the front hatch
3. Unlatch the two rear latches.
4. Push the tent up. Done!

CLOSE:

1. Grab the black strap and bring it to the passenger side.
2. Push the gas strut to unlock it, then pull the tent down.
3. Latch the two rear latches. 
4. Latch the two latches on the hatch. Done!

The camper mounts directly to your truck’s bed rails, keeping your truck box open and accessible.

To enter: Simply push up either panel from inside the truck box.

The camper requires minimal routine maintenance:

• Check mounting bolts: Every 3,000 km or after heavy off-roading.
  
• Lubricate locks: Every 2–3 months.
  
• Air out the tent: After wet trips and before closing.

See the Owner’s Manual in the footer for full maintenance details.

• 4750 mm PU-coated tent fabric
• Rain fly included
• Designed for Canadian weather
• Not insulated (Add our insulation liner package!)

Estimated 16-20 weeks.

Lead times are estimates and subject to change. If you have questions about a lead time, please reach out to support@roamifycampers.com

Compatibility
Most mid & full-size trucks

Built
Designed in Canada. Manufactured in Hong Kong with bolts, awning brackets, seals provided & installed in BC

Bed to Camper Seal
3 M bulb seal around truck bed edges. This includes passenger, Rubber front, driver and passenger sides

Window Seal
3M bulb seal friction filled around windows

Tailgate Seal
Custom in house 2-1/4” T-Seal (firm fit)

Mattress Materials
8 cm thick foam mattress with removable 6 way stretch top cover. 

Mattress Dimensions (inside)
48" x 96" (inside dimensions)

Tent Thickness
10" outside dimensions over cab

Tent Fabric
#6535 Polyester with a 4,750mm rated PU coating

Tent Ventilation
Mesh / rain fly on rear & both passenger sides

Tent Security
Locking side doors (x2) locks per panel. Includes (x2) locks on the rear panel from the inside controllable from the interior of the unit.

Third Brake Light
Integrated, wire harness and wiretap included

Rain Screen
Removable rain screen (zipper on and zipper off)

Construction
Aluminum composite panels, aluminum extrusions laser welded together. Comes with stainless steel hardware powder coated matte black to match.

Aluminum Material
6000 series aluminum

Automotive Glass
7mm acrylic tempered tinted windows

Dynamic Roof Load
175 lbs

Tent Roof
Composite honeycomb panel

Paint
Class “A” matte black powder coast

Weight
About 295 lbs - 375 lbs (varies by truck size)

From the moment you place your deposit to the day you pick up your camper, our team keeps you updated every step of the way.

1. Place Your Deposit
Your deposit secures your camper and allows us to begin preparing everything needed for production.

2. Production Begins
We gather the materials and components for your camper and begin production. We’ll keep you updated as your camper progresses.

3. On Its Way to Us
Once production is complete, your camper is transported to our Abbotsford facility for its final preparation and quality checks.

4. Final Prep & Quality Control
Once your camper arrives, our team completes the finishing work, including sealing, water testing, accessory installation, and a thorough final inspection.

5. Final Balance & Installation
When your camper is ready, we’ll contact you for the remaining balance and schedule your installation appointment.

6. Installation Day
Our team installs your camper at our Abbotsford facility and makes sure everything is ready for you before you head out. Install takes about 1 hour but may vary if electrical or solar is being added.

Throughout the Process
You’ll receive updates from our team throughout the process, so you always know what stage your camper is at and what comes next.

View our Dual Wedge Walk Around Video - HERE